Seven-function Electric Hospital Bed
NO.:001957
Product Model:RH-AD703
Product Size:2275*1080*510-910MM
Product introduction:
This product is mainly used for long-term bedridden, inconvenient to turn over on their own, after surgery need specific posture bedridden patients, the elderly use.
1.Weighing function: weighing accuracy ≤ 0.2kg, weighing range 0-150kg; and power failure protection function and off-bed alarm function.
2. Double-layer column solid structure: bed + overall base + column, solid and solid; bed safety static load ≥ 200kg, bed safety working load ≥ 150kg.
3.The bed surface backboard adopts double-support unloading structure, which minimizes the stress on the solenoid and effectively prolongs the service life of the solenoid and the Hospital Bed.
4.The size of bed head and tail board: ≥940*535mm, using specifications Φ28*4 Aluminum alloy tube installation and with locking bit, easy to dismantle and install, locking switch by the high-strength nylon material injection molding, sturdy and durable. The top of the bed head and tail board is 470mm away from the bed, and there are 3 hollow bits on the upper part, which is convenient for hand holding. Curve design of bed head and tail board, bed surface bed head and tail board adopts antibacterial, environmental protection material blow molding, smooth and easy to clean the surface, impact resistance, heat resistance, low temperature resistance, chemical resistance and excellent electrical performance.
5.The bed is equipped with anti-bump wheels: the 4 corners of the bed are equipped with ball-type anti-bump wheels.
6. Guardrail: full-enclosed four-piece segmented guardrail, spacing between guardrail ≤ 60mm, spacing between guardrail and head-tail board ≤ 60mm, the top of guardrail is 350mm away from the bed surface, the outer side of guardrail is equipped with ball-type angle indicator, the guardrail lifting and lowering is equipped with a damping slow descender, the main and vice-control arms are all formed by one-piece casting of aluminum alloy, and the switches adopt the straight-line movement method and anti-pinch design. The head and tail board of the bed and both sides of the guardrail are available in a variety of colors.
7.Bed surface: the bed surface is made of 1.2mm thickness high-quality cold-rolled steel plate, laser cut and molded, and is equipped with a square tube frame and one-piece connectors to further enhance the strength of the bed surface, the back of the bed surface is equipped with an automatic return system, which automatically returns to the head of the bed when adjusting the position of the hospital bed and automatically extends the bed surface in the pelvic area, which reduces the pressure on the pelvic and sacral areas and effectively prevents bedsores; the foot of the bed surface is equipped with plastic mattresses. The foot of the bed is equipped with a plastic mattress frame to prevent the mattress from sliding.
8.Electric actuator: including 2 column motors and 3 straight electric actuators.Adopt brand DC safe voltage motor drive system and control box, product protection grade IPX4, low noise operation, average trouble-free operation ≥ 8000 hours, high quality brand motor configuration.
9.Casters: double-sided φ150 six-inch medium control casters, wheel surface with wear-resistant materials, caster skeleton using aviation aluminum die-casting, built-in fully enclosed self-lubricating bearings, mute and wear-resistant; bilateral brakes foot pedal a foot brake, bilateral ground solid and reliable.
10.Electric/Manual CPR: Electric CPR is operated by one key. Manual CPR can make the backrest return to the position urgently to ensure the patient’s safety in case of insufficient power, and is equipped with a damping device to prevent the backrest from falling down instantly, which can be operated with one hand.
Technical Parameter:
Overall Size | 2230*1050*590-870±50mm |
Mattress platform size | 1960*900±10mm |
Height adjustment range | 510~910mm±20mm |
Calf Plate to Bed Frame Angle | <5° |
Backrest section adjustment range | 0-65°±5° |
Leg section adjustment range | 0-40°±5° |
Trendelenburg&Reserve-Trendelenburg | 0-12° |
Left&Right tilt angle | 0-17° |
Load-bearing | 220kg |
Technical Configuration:
Double anti-collision casters | 4pcs |
Casters for center control | 4pcs |
Sockets for infusion rack | 4pcs |
Stainless steel four-claw infusion rack | 1pc |
Removable ABS drainage hooks | 6pcs |
Guardrail | 4pcs |
Color screen nurse operation panel | 1pc |
Handheld controller | 1pc |
Angle display | 2pcs |
Equipped with a battery | 1pc |
Inflatable anti-decubitus turnover mattress | 1pc |