Manual Patient Transfer Trolley

NO.:000016
Product Model:RH-DM101
Product Size:1930*645*510-850MM
File Download

Category:

Product Details:

Product introduction:

  • Back lifting system: back lifting is controlled by high quality mute gas spring.
  • High and low adjustment: metal material rocker system, overload protection function, not easy to break.
  • Bed board: PP resin molding products.
  • Frame: made of steel/partial aluminum products.
  • Guardrail plate: PP resin molding both sides of the guardrail plate, height of 300mm, the patient is more secure, can also be fixed horizontally to increase the width of the bed, so that the infusion of the arm of the person who has a comfortable place to place; and has a double safety lock for locking, to prevent misuse, and improve the safety of the operation.
  • Guardrail plate is equipped with angle display, easy to know the angle of the back rising when nursing; both sides of the guardrail plate in the middle of the groove, to prevent the catheter from slipping, convenient infusion drainage. Aluminum die-casting one-piece guardrail bracket, higher strength, humanization, better appearance.
  • Casters: center lock double-sided with anti-tangling function casters, to prevent hair and other debris into the casters inside the implementation of the fault caused by four 150mm diameter casters, cart corners have caster control system, a foot brake, four wheels fixed at the same time.
  • The center brake linkage lever using integrated round tube molding to ensure higher strength.
  • Independent center fifth wheel system: both sides of the trolley are installed with a control pedal bar, the center fifth wheel is free to travel when it is put away; when in use, that is, the “straight” state (the pedal bar is 70mm above the ground, better through), to overcome the inertial force in the transport process, effectively control the direction of advancement, so that the transport process is more secure.
  • Under the bed body has two sections of tray, tray is divided into two parts of different sizes and depths, with 6 water leakage holes, easy to use, the tray can bear 10kg.
  • Infusion rack collection rack, fixed collection of infusion rack.
  • Oxygen cylinder shelves, can be placed in the capacity of 500 liters (diameter 105-115mm) of oxygen cylinders.
  • Transfer mattress: fabric surface waterproof treatment, easy to clean, four corners are equipped with zippers, the external fabric can be washed; anti-static 3-section structure, only one person operation that can be parallel docking and transfer of patients.

Technical Parameter:

Model

RH-DM101

Product Size

1930*645*510-850mm

Back Lift

0-70°

Safe working load

170kg

Packing size

197.5*69*54.5cm

N.W

78kg

G.W

85kg

Technical Configuration:

Bed body

1set

Integrated guardrail

2pcs

Double-sided casters

4pcs

Center locking pedal

4sets

Center fifth wheel

1set

Integral lifting rocker

1set

Back lifting gas pressure spring

1set

Large bottom tray

1pc

Infusion rack

1pc

Standard infusion rack jacks

4pcs

Oxygen cylinder hanging rack

1pc

Transfer mattress

1pc